參考價格
面議型號
100184品牌
先豐納米產地
江蘇樣本
暫無制作方法:
.質量標準:
.純度:
99.%目數:
0.4-1微米品級:
一級看了Graphene Supermarket二硫化鎢微片的用戶又看了
虛擬號將在 180 秒后失效
使用微信掃碼撥號
號 | CAS號 | 編號 | 包裝 | 參數 |
100184 | 12138-09-9 | XF061 | 100g | 純度99% 粒徑范圍:0.4-1微米 |
平均粒徑范圍:0.4-1微米
純度> 99%
Average Particle Size: 0.4-1 microns
Purity: 99%
WS2 Micropowder is useful for creating WS2 solutions with applications ranging from electronics to energy storage. The powder may be sonicated in a range of liquid solvents, whereas the longer sonication takes place, the smaller the flake size in solution. Further, before sonication the solution will be silvery, and after it will turn a greenish-yellow. The solvents useful during sonication include benzyl benzoate, isopropanol, acetone, methanol, and many others.
The liquid dispersion may then be used to create a thin film on the substrate of your choosing. These thin-films have a range of applications, such as transistors, solar cells, and energy storage devices.
WS2 solution can also be used in composite materials.
The difference between our micropowders and ultrafine powders are their flake sizes. Ultrafine powders have smaller flakes, and create dispersions with smaller particle sizes after sonication than micropowder. Micropowders require more sonication and will result in flakes with larger lateral dimensions. Micropowder is a low-cost alternative to our ultrafine powder.
Transparent and Flexible Electronics
Transistors
Composite Materials
Chemical and bio-sensors
Semiconductor printable inks
Electrical Characteristics of Molybdenum Disulfide Flakes Produced by Liquid Exfoliation, Lee et al. Adv. Mater. 2011, 23, pp. 4178-4182
Gelatin-assisted fabrication of water-dispersible graphene and its inorganic analogues, Ge et al. J. Mater. Chem. 2012, 22, pp. 17619-17624
Preparation of High Concentration Dispersions of Exfoliated MoS2 with Increased Flake Size, O.Neill et al. Chem. Mater. 2012, 24, pp. 2414-2421
Two-Dimensional Nanosheets Produced by Liquid Exfoliation of Layered Materials, Coleman et al. Science, 2011, 331, pp. 568-571
暫無數據!
評論人:上海大學 宋永騰文章內容概述骨缺損修復是一個復雜的多階段生理過程,涉及早期血管生成和后期成骨的耦合,且常因感染而變得復雜,因此該過程仍然是一個重大的臨床難題。盡管功能性載藥工程支架有望解決這一
評論人:寧夏大學 慕海強研究背景電化學二氧化碳還原(ECO2RR)為將溫室氣體轉化為高附加值化學品或燃料提供了可行路徑,其中一氧化碳(CO)因其經濟高效、清潔低耗成為研究重點。盡管貴金屬(Ag、Au、
單原子催化在過去十年中引起了廣泛關注。由于其獨特的活性位點結構,單原子催化在熱催化、電催化和環境催化等許多體系中表現出超高的原子利用效率和獨特的催化活性和選擇性。本期小豐整理了3篇單原子催化劑近期發表
石墨烯因其優異的電學、機械和熱學性能,自發現以來便備受學術界和工業界的關注。經過20多年的研究與發展,石墨烯仍然是人們關注的明星材料。特別是進入2025年5月以來,Nature、Science已連續報
光熱治療(PTT)因其高選擇性、最小副作用和精確的時空控制,已成為應對創傷感染的極具前景的方法。近年來,各種光熱劑,包括有機光熱劑、金屬基納米材料、碳基納米材料和有機/無機納米復合材料,已被探索用于破